TYPO3 main API: ContainerBackend

ContainerBackend extends SimpleFileBackend

A caching backend which stores cache entries in files, but does not support or care about expiry times and tags.

Internal

Constants

DATASIZE_DIGITS = 10
DATETIME_EXPIRYTIME_UNLIMITED = '9999-12-31T23:59:59+0000'
EXPIRYTIME_FORMAT = 'YmdHis'
EXPIRYTIME_LENGTH = 14
SEPARATOR = '^'
UNLIMITED_LIFETIME = 0

Properties

$cache : FrontendInterface: Reference to the cache which uses this backend
$cacheDirectory : string: Directory where the files are stored
$cacheEntryFileExtension : string: A file extension to use for each cache entry.
$cacheEntryIdentifiers : array<string|int, mixed>
$cacheIdentifier : string
$context : string: The current application context
$defaultLifetime : int: Default lifetime of a cache entry in seconds
$frozen : bool
$temporaryCacheDirectory : string: Temporary path to cache directory before setCache() was called. It is set by setCacheDirectory() and used in setCache() method which calls the directory creation if needed. The variable is not used afterwards, the final cache directory path is stored in $this->cacheDirectory then.

Methods

__construct() : mixed: Constructs this backend
collectGarbage() : mixed: Not necessary
flush() : mixed: Removes all cache entries of this cache.
flushByTags() : mixed: Backwards compatibility safeguard since re-introducing flushByTags as API.
forceFlush() : void
get() : mixed: Loads data from a cache file.
getCacheDirectory() : string: Returns the directory where the cache files are stored
has() : bool: Checks if a cache entry with the specified identifier exists.
remove() : bool: Removes all cache entries matching the specified identifier.
require() : mixed: Loads PHP code from the cache and require it right away.
requireOnce() : mixed: Loads PHP code from the cache and require_onces it right away.
set() : mixed: Saves data in a cache file.
setCache() : mixed: Sets a reference to the cache frontend which uses this backend and initializes the default cache directory.
setCacheDirectory() : mixed: Sets the directory where the cache files are stored. By default it is assumed that the directory is below TYPO3's Project Path. However, an absolute path can be selected, too.
setDefaultLifetime() : mixed: Sets the default lifetime for this cache backend
calculateExpiryTime() : DateTime: Calculates the expiry time by the given lifetime. If no lifetime is specified, the default lifetime is used.
createFinalCacheDirectory() : mixed: Create the final cache directory if it does not exist.
findCacheFilesByIdentifier() : mixed: Tries to find the cache entry for the specified identifier.
isCacheFileExpired() : bool: Checks if the given cache entry files are still valid or if their lifetime has exceeded.

DATASIZE_DIGITS


    public
        mixed
    DATASIZE_DIGITS
    = 10

DATETIME_EXPIRYTIME_UNLIMITED


    public
        mixed
    DATETIME_EXPIRYTIME_UNLIMITED
    = '9999-12-31T23:59:59+0000'

EXPIRYTIME_FORMAT


    public
        mixed
    EXPIRYTIME_FORMAT
    = 'YmdHis'

EXPIRYTIME_LENGTH


    public
        mixed
    EXPIRYTIME_LENGTH
    = 14

SEPARATOR


    public
        mixed
    SEPARATOR
    = '^'

UNLIMITED_LIFETIME


    public
        mixed
    UNLIMITED_LIFETIME
    = 0

$cache

Reference to the cache which uses this backend


    protected
        FrontendInterface
    $cache

$cacheDirectory

Directory where the files are stored


    protected
        string
    $cacheDirectory
     = ''

$cacheEntryFileExtension

A file extension to use for each cache entry.


    protected
        string
    $cacheEntryFileExtension
     = ''

$cacheEntryIdentifiers


    protected
        array<string|int, mixed>
    $cacheEntryIdentifiers
     = []

$cacheIdentifier


    protected
        string
    $cacheIdentifier

$context

The current application context


    protected
        string
    $context

This variable is currently unused and set to "production" always. It is only kept to keep backwards compatibility.

$defaultLifetime

Default lifetime of a cache entry in seconds


    protected
        int
    $defaultLifetime
     = 3600

$frozen


    protected
        bool
    $frozen
     = false

$temporaryCacheDirectory

Temporary path to cache directory before setCache() was called. It is set by setCacheDirectory() and used in setCache() method which calls the directory creation if needed. The variable is not used afterwards, the final cache directory path is stored in $this->cacheDirectory then.


    protected
        string
    $temporaryCacheDirectory
     = ''

Temporary path to cache directory

__construct()

Constructs this backend


    public
                    __construct(string $context[, array<string|int, mixed> $options = [] ]) : mixed

Parameters

$context : string: Unused, for backward compatibility only
$options : array<string|int, mixed> = []: Configuration options - depends on the actual backend

collectGarbage()

Not necessary


    public
                    collectGarbage() : mixed

flush()

Removes all cache entries of this cache.


    public
                    flush() : mixed

Flushes a directory by first moving to a temporary resource, and then triggering the remove process. This way directories can be flushed faster to prevent race conditions on concurrent processes accessing the same directory.

flushByTags()

Backwards compatibility safeguard since re-introducing flushByTags as API.


    public
                    flushByTags(array<string|int, string> $tags) : mixed

See https://review.typo3.org/#/c/50537/ comments for patch set 14.

The method is here even though it is only required for TaggableBackendInterface. We add it here to ensure third party cache backends do not fail but instead delegate to a less efficient linear flushing behavior.

Parameters

$tags : array<string|int, string>

forceFlush()


    public
                    forceFlush() : void

get()

Loads data from a cache file.


    public
                    get(string $entryIdentifier) : mixed

Parameters

$entryIdentifier : string: An identifier which describes the cache entry to load

Return values

mixed —

The cache entry's content as a string or FALSE if the cache entry could not be loaded

getCacheDirectory()

Returns the directory where the cache files are stored


    public
                    getCacheDirectory() : string

Return values

string —

Full path of the cache directory

has()

Checks if a cache entry with the specified identifier exists.


    public
                    has(string $entryIdentifier) : bool

Parameters

$entryIdentifier : string

Return values

bool —

TRUE if such an entry exists, FALSE if not

remove()

Removes all cache entries matching the specified identifier.


    public
                    remove(string $entryIdentifier) : bool

Usually this only affects one entry.

Parameters

$entryIdentifier : string: Specifies the cache entry to remove

Return values

bool —

TRUE if (at least) an entry could be removed or FALSE if no entry was found

require()

Loads PHP code from the cache and require it right away.


    public
                    require(string $entryIdentifier) : mixed

Parameters

$entryIdentifier : string: An identifier which describes the cache entry to load

Return values

mixed —

Potential return value from the include operation

requireOnce()

Loads PHP code from the cache and require_onces it right away.


    public
                    requireOnce(string $entryIdentifier) : mixed

Parameters

$entryIdentifier : string: An identifier which describes the cache entry to load

Return values

mixed —

Potential return value from the include operation

set()

Saves data in a cache file.


    public
                    set(string $entryIdentifier, string $data[, array<string|int, mixed> $tags = [] ][, int $lifetime = null ]) : mixed

Parameters

$entryIdentifier : string: An identifier for this specific cache entry
$data : string: The data to be stored
$tags : array<string|int, mixed> = []: Tags to associate with this cache entry
$lifetime : int = null: This cache backend does not support life times

setCache()

Sets a reference to the cache frontend which uses this backend and initializes the default cache directory.


    public
                    setCache(FrontendInterface $cache) : mixed

Parameters

$cache : FrontendInterface: The cache frontend

setCacheDirectory()

Sets the directory where the cache files are stored. By default it is assumed that the directory is below TYPO3's Project Path. However, an absolute path can be selected, too.


    public
                    setCacheDirectory(string $cacheDirectory) : mixed

This method enables to use a cache path outside of TYPO3's Project Path. The final cache path is checked and created in createFinalCacheDirectory(), called by setCache() method, which is done after the cacheDirectory option was handled.

Parameters

$cacheDirectory : string: The cache base directory. If a relative path

setDefaultLifetime()

Sets the default lifetime for this cache backend


    public
                    setDefaultLifetime(int $defaultLifetime) : mixed

Parameters

$defaultLifetime : int: Default lifetime of this cache backend in seconds. If NULL is specified, the default lifetime is used. "0" means unlimited lifetime.

calculateExpiryTime()

Calculates the expiry time by the given lifetime. If no lifetime is specified, the default lifetime is used.


    protected
                    calculateExpiryTime([int $lifetime = null ]) : DateTime

Parameters

$lifetime : int = null: The lifetime in seconds

Return values

DateTime —

The expiry time

createFinalCacheDirectory()

Create the final cache directory if it does not exist.


    protected
                    createFinalCacheDirectory(string $finalCacheDirectory) : mixed

Parameters

$finalCacheDirectory : string: Absolute path to final cache directory

findCacheFilesByIdentifier()

Tries to find the cache entry for the specified identifier.


    protected
                    findCacheFilesByIdentifier(string $entryIdentifier) : mixed

Parameters

$entryIdentifier : string: The cache entry identifier

Return values

mixed —

The file names (including path) as an array if one or more entries could be found, otherwise FALSE

isCacheFileExpired()

Checks if the given cache entry files are still valid or if their lifetime has exceeded.


    protected
                    isCacheFileExpired(string $cacheEntryPathAndFilename) : bool

Parameters

$cacheEntryPathAndFilename : string

Return values

bool

ContainerBackend extends SimpleFileBackend

Table of Contents

Constants

Properties

Methods

Constants

DATASIZE_DIGITS

DATETIME_EXPIRYTIME_UNLIMITED

EXPIRYTIME_FORMAT

EXPIRYTIME_LENGTH

SEPARATOR

UNLIMITED_LIFETIME

Properties

$cache

$cacheDirectory

$cacheEntryFileExtension

$cacheEntryIdentifiers

$cacheIdentifier

$context

$defaultLifetime

$frozen

$temporaryCacheDirectory

Methods

__construct()

Parameters

Tags

collectGarbage()

flush()

flushByTags()

Parameters

forceFlush()

get()

Parameters

Tags

Return values

getCacheDirectory()

Return values

has()

Parameters

Tags

Return values

remove()

Parameters

Tags

Return values

require()

Parameters

Tags

Return values

requireOnce()

Parameters

Tags

Return values

set()

Parameters

Tags

setCache()

Parameters

Tags

setCacheDirectory()

Parameters

Tags

setDefaultLifetime()

Parameters

Tags

calculateExpiryTime()

Parameters

Return values

createFinalCacheDirectory()

Parameters

Tags

findCacheFilesByIdentifier()

Parameters

Return values

isCacheFileExpired()

Parameters

Return values