TYPO3 main API: GeneralUtility

GeneralUtility

The legendary "t3lib_div" class - Miscellaneous functions for general purpose.

Most of the functions do not relate specifically to TYPO3 However a section of functions requires certain TYPO3 features available See comments in the source. You are encouraged to use this library in your own scripts!

USE: All methods in this class are meant to be called statically. So use \TYPO3\CMS\Core\Utility\GeneralUtility::[method-name] to refer to the functions, eg. '\TYPO3\CMS\Core\Utility\GeneralUtility::milliseconds()'

Properties

$container : ContainerInterface|null
$finalClassNameCache : array<class-string, class-string>: Cache for `makeInstance` with given class name and final class names to reduce number of `self::getClassName()` calls
$indpEnvCache : array<string, string|bool|array<string, string|bool|null>|null>
$nonSingletonInstances : array<class-string, array<int, object>>: Instances returned by `makeInstance`, using the class names as array keys
$singletonInstances : array<class-string, SingletonInterface>: Singleton instances returned by `makeInstance`, using the class names as array keys

Methods

addInstance() : void: Sets the instance of a non-singleton class to be returned by `makeInstance`.
array2xml() : string: Converts a PHP array into an XML string.
callUserFunction() : mixed: Calls a user-defined function/method in class Such a function/method should look like this: "function proc(&$params, &$ref) {...}"
camelCaseToLowerCaseUnderscored() : string: Returns a given CamelCasedString as a lowercase string with underscores.
cmpFQDN() : bool: Match fully qualified domain name with list of strings with wildcard
cmpIP() : bool: Match IP number with list of numbers with wildcard Dispatcher method for switching into specialised IPv4 and IPv6 methods.
cmpIPv4() : bool: Match IPv4 number with list of numbers with wildcard
cmpIPv6() : bool: Match IPv6 address with a list of IPv6 prefixes
copyDirectory() : void: Low level utility function to copy directories and content recursive
createVersionNumberedFilename() : string: Function for static version numbers on files, based on the filemtime
dirname() : string: Returns the directory part of a path without trailing slash If there is no dir-part, then an empty string is returned.
expandList() : string: Expand a comma-separated list of integers with ranges (eg 1,3-5,7 becomes 1,3,4,5,7).
explodeUrl2Array() : array<string|int, string>: Explodes a string with GETvars (eg. "&id=1&type=2&ext[mykey]=3") into an array.
fixed_lgd_cs() : string: Truncates a string with appended/prepended "..." and takes current character set into consideration.
fixPermissions() : bool: Sets the file system mode and group ownership of a file or a folder.
fixWindowsFilePath() : string: Fixes a path for windows-backslashes and reduces double-slashes to single slashes
flushInternalRuntimeCaches() : void: Flushes some internal runtime caches: - the class-name mapping used by `makeInstance()` - the cache for `getIndpEnv()`
formatSize() : string: Formats the input integer $sizeInBytes as bytes/kilobytes/megabytes (-/K/M)
get_dirs() : array<string|int, string>|string|null: Returns an array with the names of folders in a specific path Will return 'error' (string) if there were an error with reading directory content.
get_tag_attributes() : array<string, string>: Returns an array with all attributes of the input HTML tag as key/value pairs. Attributes are only lowercase a-z $tag is either a whole tag (eg '<TAG OPTION ATTRIB=VALUE>') or the parameter list (ex ' OPTION ATTRIB=VALUE>') If an attribute is empty, then the value for the key is empty. You can check if it existed with isset()
getAllFilesAndFoldersInPath() : array<string, string>: Recursively gather all files and folders of a path.
getBytesFromSizeMeasurement() : int: Gets the bytes value from a measurement string like "100k".
getClassName() : class-string: Returns the class name for a new instance, taking into account registered implementations for this class
getContainer() : ContainerInterface
getFileAbsFileName() : string: Returns the absolute filename of a relative reference, resolves the "EXT:" prefix (way of referring to files inside extensions) and checks that the file is inside the TYPO3's base folder and implies a check with \TYPO3\CMS\Core\Utility\GeneralUtility::validPathStr().
getFilesInDir() : array<string, string>|string: Finds all files in a given path and returns them as an array. Each array key is a md5 hash of the full path to the file. This is done because 'some' extensions like the import/export extension depend on this.
getIndpEnv() : string|bool|array<string, string|bool|null>|null: Abstraction method which returns System Environment Variables regardless of server OS, CGI/MODULE version etc. Basically this is SERVER variables for most of them.
getInstances() : array<class-string, array<string|int, object>>: Get all currently registered non singleton instances
getMaxUploadFileSize() : int: Returns the maximum upload size for a file that is allowed. Measured in KB.
getSingletonInstances() : array<class-string, SingletonInterface>: Get all currently registered singletons
getUrl() : string|false: Reads the file or url $url and returns the content If you are having trouble with proxies when reading URLs you can configure your way out of that with settings within $GLOBALS['TYPO3_CONF_VARS']['HTTP'].
implodeArrayForUrl() : string: Implodes a multidim-array into GET-parameters (eg. &param[key][key2]=value2&param[key][key3]=value3)
implodeAttributes() : string: Implodes attributes in the array $arr for an attribute list in eg. and HTML tag (with quotes)
inList() : bool: Check for item in list Check if an item exists in a comma-separated list of items.
intExplode() : array<int, int>: Explodes a $string delimited by $delimiter and casts each item in the array to (int).
isAllowedAbsPath() : bool: Returns TRUE if the path is absolute, without backpath '..' and within TYPO3s project or public folder OR within the lockRootPath
isOnCurrentHost() : bool: Checks if a given URL matches the host that currently handles this HTTP request.
isValidUrl() : bool: Checks if a given string is a Uniform Resource Locator (URL).
jsonEncodeForHtmlAttribute() : string: Serializes data to JSON, to be used in HTML attribute, e.g.
jsonEncodeForJavaScript() : string: Serializes data to JSON, to be used in JavaScript instructions, e.g.
locationHeaderUrl() : mixed: Prefixes a URL used with 'header-location' with 'http://...' depending on whether it has it already.
makeInstance() : T: Creates an instance of a class taking into account the class-extensions API of TYPO3. USE THIS method instead of the PHP `new` keyword.
makeInstanceForDi() : T: Creates a class taking implementation settings and class aliases into account.
makeInstanceService() : object|array<string|int, string>|false: Find the best service and check if it works.
md5int() : int: Makes a positive integer hash out of the first 7 chars from the md5 hash of the input
mkdir() : bool: Wrapper function for mkdir.
mkdir_deep() : void: Creates a directory - including parent directories if necessary and sets permissions on newly created directories.
normalizeIPv6() : string: Normalize an IPv6 address to full length
purgeInstances() : void: Purge all instances returned by makeInstance.
quoteJSvalue() : string: Quotes a string for usage as JS parameter.
removeDotsFromTS() : array<string|int, mixed>: Removes dots "." from end of a key identifier of TypoScript styled array.
removePrefixPathFromList() : array<string|int, string>|string: Removes the absolute part of all files/folders in fileArr
removeSingletonInstance() : void: Removes the instance of a singleton class to be returned by `makeInstance`.
resetSingletonInstances() : void: Set a group of singleton instances. Similar to `setSingletonInstance()`, but multiple instances can be set.
resolveBackPath() : string: Resolves "../" sections in the input path string.
revExplode() : array<int, string>: Reverse explode which explodes the string counting from behind.
rmdir() : bool: Wrapper function for rmdir, allowing recursive deletion of folders and files
sanitizeCssVariableValue() : string: Very, very, very basic CSS sanitizer which removes `{`, `}`, `\n`, `\r` from CSS variable values and encodes potential HTML entities `<`+`>`.
sanitizeLocalUrl() : string: Checks if a given string is a valid frame URL to be loaded in the backend.
setContainer() : void
setIndpEnv() : mixed: This method is only for testing and should never be used outside tests.
setSingletonInstance() : void: Sets the instance of a singleton class to be returned by `makeInstance`.
split_fileref() : array<string, string>: Splits a reference to a file in 5 parts
split_tag_attributes() : array<string|int, string>: Returns an array with the 'components' from an attribute list from an HTML tag. The result is normally analyzed by get_tag_attributes Removes tag-name if found
splitCalc() : array<int, array<int, string>>: This splits a string by the chars in $operators (typical /+-*) and returns an array with them in
tempnam() : non-empty-string: Create temporary filename (Create file with unique file name) This function should be used for getting temporary file names - will make your applications safe for open_basedir = on REMEMBER to delete the temporary files after use! This is done by \TYPO3\CMS\Core\Utility\GeneralUtility::unlink_tempfile()
trimExplode() : array<int, string>: Explodes a string and removes whitespace-only values.
underscoredToLowerCamelCase() : string: Returns a given string with underscores as lowerCamelCase.
underscoredToUpperCamelCase() : string: Returns a given string with underscores as UpperCamelCase.
unlink_tempfile() : bool|null: Deletes (unlink) a temporary filename in the var/ or typo3temp folder given as input.
upload_copy_move() : bool: Moves $source file to $destination if uploaded, otherwise try to make a copy
upload_to_tempfile() : string: Will move an uploaded file (normally in "/tmp/xxxxx") to a temporary filename in Environment::getProjectPath() . "var/" from where TYPO3 can use it.
validEmail() : bool: Checking syntax of input email address
validIP() : bool: Validate a given IP address.
validIPv4() : bool: Validate a given IP address to the IPv4 address format.
validIPv6() : bool: Validate a given IP address to the IPv6 address format.
validPathStr() : bool: Checks for malicious file paths.
wrapJS() : string: Wraps JavaScript code XHTML ready with <script>-tags Automatic re-indenting of the JS code is done by using the first line as indent reference.
writeFile() : bool: Writes $content to the file $file
writeFileToTypo3tempDir() : string|null: Writes $content to a filename in the typo3temp/ folder (and possibly one or two subfolders...) Accepts an additional subdirectory in the file path!
writeJavaScriptContentToTemporaryFile() : string: Writes string to a temporary file named after the md5-hash of the string Quite useful for extensions adding their custom built JavaScript during runtime.
writeStyleSheetContentToTemporaryFile() : string: Writes string to a temporary file named after the md5-hash of the string Quite useful for extensions adding their custom built StyleSheet during runtime.
xml2array() : array<string|int, mixed>|string: Converts an XML string to a PHP array.
xml2arrayProcess() : array<string|int, mixed>|string: Converts an XML string to a PHP array.
xml2tree() : array<string|int, mixed>|string: Parses XML input into a PHP array with associative keys
xmlRecompileFromStructValArray() : string: This implodes an array of XML parts (made with xml_parse_into_struct()) into XML again.
checkInstanceClassName() : void: Checks that `$className` is non-empty and that `$instance` is an instance of `$className`.
classHasImplementation() : bool: Checks if a class has a configured implementation
createDirectoryPath() : string: Creates directories for the specified paths if they do not exist. This functions sets proper permission mask but does not set proper user and group.
encodeFileSystemPathComponentForUrlPath() : string
getImplementationForClass() : class-string: Returns the configured implementation of the class
getLogger() : LoggerInterface
webserverUsesHttps() : bool: Determine if the webserver uses HTTPS.

$container


    protected
    static    ContainerInterface|null
    $container
     = null

$finalClassNameCache

Cache for `makeInstance` with given class name and final class names to reduce number of `self::getClassName()` calls


    protected
    static    array<class-string, class-string>
    $finalClassNameCache
     = []

Given class name => final class name

$indpEnvCache


    protected
    static    array<string, string|bool|array<string, string|bool|null>|null>
    $indpEnvCache
     = []

$nonSingletonInstances

Instances returned by `makeInstance`, using the class names as array keys


    protected
    static    array<class-string, array<int, object>>
    $nonSingletonInstances
     = []

$singletonInstances

Singleton instances returned by `makeInstance`, using the class names as array keys


    protected
    static    array<class-string, SingletonInterface>
    $singletonInstances
     = []

addInstance()

Sets the instance of a non-singleton class to be returned by `makeInstance`.


    public
            static        addInstance(class-string $className, object $instance) : void

If this function is called multiple times for the same $className, makeInstance will return the instances in the order in which they have been added (FIFO).

Warning: This is a helper method for unit tests. Do not call this directly in production code!

Parameters

$className : class-string
$instance : object

array2xml()

Converts a PHP array into an XML string.


    public
            static        array2xml(array<string|int, mixed> $array[, string $NSprefix = '' ][, int $level = 0 ][, string $docTag = 'phparray' ][, int $spaceInd = 0 ][, array<string|int, mixed> $options = [] ][, array<string|int, mixed> $stackData = [] ]) : string

The XML output is optimized for readability since associative keys are used as tag names. This also means that only alphanumeric characters are allowed in the tag names AND only keys NOT starting with numbers (so watch your usage of keys!). However there are options you can set to avoid this problem. Numeric keys are stored with the default tag name "numIndex" but can be overridden to other formats) The function handles input values from the PHP array in a binary-safe way; All characters below 32 (except 9,10,13) will trigger the content to be converted to a base64-string The PHP variable type of the data IS preserved as long as the types are strings, arrays, integers and booleans. Strings are the default type unless the "type" attribute is set. The output XML has been tested with the PHP XML-parser and parses OK under all tested circumstances with 4.x versions. However, with PHP5 there seems to be the need to add an XML prologue a la - otherwise UTF-8 is assumed! Unfortunately, many times the output from this function is used without adding that prologue meaning that non-ASCII characters will break the parsing!! This sucks of course! Effectively it means that the prologue should always be prepended setting the right characterset, alternatively the system should always run as utf-8! However using MSIE to read the XML output didn't always go well: One reason could be that the character encoding is not observed in the PHP data. The other reason may be if the tag-names are invalid in the eyes of MSIE. Also using the namespace feature will make MSIE break parsing. There might be more reasons...

Parameters

$array : array<string|int, mixed>: The input PHP array with any kind of data; text, binary, integers. Not objects though.
$NSprefix : string = '': tag-prefix, eg. a namespace prefix like "T3:"
$level : int = 0: Current recursion level. Don't change, stay at zero!
$docTag : string = 'phparray': Alternative document tag. Default is "phparray".
$spaceInd : int = 0: If greater than zero, then the number of spaces corresponding to this number is used for indenting, if less than zero - no indentation, if zero - a single TAB is used
$options : array<string|int, mixed> = []: Options for the compilation. Key "useNindex" => 0/1 (boolean: whether to use "n0, n1, n2" for num. indexes); Key "useIndexTagForNum" => "[tag for numerical indexes]"; Key "useIndexTagForAssoc" => "[tag for associative indexes"; Key "parentTagMap" => array('parentTag' => 'thisLevelTag')
$stackData : array<string|int, mixed> = []: Stack data. Don't touch.

Return values

string —

An XML string made from the input content in the array.

callUserFunction()

Calls a user-defined function/method in class Such a function/method should look like this: "function proc(&$params, &$ref) {...}"


    public
            static        callUserFunction(non-empty-string|Closure $funcName, mixed &$params[, object|null $ref = null ]) : mixed

Parameters

$funcName : non-empty-string|Closure: Function/Method reference or Closure.
$params : mixed: Parameters to be pass along (typically an array) (REFERENCE!)
$ref : object|null = null: Reference to be passed along (typically "$this" - being a reference to the calling object)

Return values

mixed —

Content from method/function call

camelCaseToLowerCaseUnderscored()

Returns a given CamelCasedString as a lowercase string with underscores.


    public
            static        camelCaseToLowerCaseUnderscored(string $string) : string

Example: Converts BlogExample to blog_example, and minimalValue to minimal_value

Parameters

$string : string: String to be converted to lowercase underscore

Return values

string —

lowercase_and_underscored_string

cmpFQDN()

Match fully qualified domain name with list of strings with wildcard


    public
            static        cmpFQDN(string $baseHost, string $list) : bool

Parameters

$baseHost : string: A hostname or an IPv4/IPv6-address (will by reverse-resolved; typically REMOTE_ADDR)
$list : string: A comma-list of domain names to match with. -wildcard allowed but cannot be part of a string, so it must match the full host name (eg. myhost..com => correct, myhost.*domain.com => wrong)

Return values

bool —

TRUE if a domain name mask from $list matches $baseIP

cmpIP()

Match IP number with list of numbers with wildcard Dispatcher method for switching into specialised IPv4 and IPv6 methods.


    public
            static        cmpIP(string $baseIP, string $list) : bool

Parameters

$baseIP : string: Is the current remote IP address for instance, typ. REMOTE_ADDR
$list : string: Is a comma-list of IP-addresses to match with. CIDR-notation should be used. For IPv4 addresses only, the -wildcard is also allowed instead of number, plus leaving out parts in the IP number is accepted as wildcard (eg. 192.168..* equals 192.168). If list is "*" no check is done and the function returns TRUE immediately. An empty list always returns FALSE.

Return values

bool —

TRUE if an IP-mask from $list matches $baseIP

cmpIPv4()

Match IPv4 number with list of numbers with wildcard


    public
            static        cmpIPv4(string $baseIP, string $list) : bool

Parameters

$baseIP : string: Is the current remote IP address for instance, typ. REMOTE_ADDR
$list : string: Is a comma-list of IP-addresses to match with. CIDR-notation, -wildcard allowed instead of number, plus leaving out parts in the IP number is accepted as wildcard (eg. 192.168.0.0/16 equals 192.168..* equals 192.168), could also contain IPv6 addresses

Return values

bool —

TRUE if an IP-mask from $list matches $baseIP

cmpIPv6()

Match IPv6 address with a list of IPv6 prefixes


    public
            static        cmpIPv6(string $baseIP, string $list) : bool

Parameters

$baseIP : string: Is the current remote IP address for instance
$list : string: Is a comma-list of IPv6 prefixes, could also contain IPv4 addresses. IPv6 addresses must be specified in CIDR-notation, not with * wildcard, otherwise self::validIPv6() will fail.

Return values

bool —

TRUE If a baseIP matches any prefix

copyDirectory()

Low level utility function to copy directories and content recursive


    public
            static        copyDirectory(string $source, string $destination) : void

Parameters

$source : string: Path to source directory, relative to document root or absolute
$destination : string: Path to destination directory, relative to document root or absolute

createVersionNumberedFilename()

Function for static version numbers on files, based on the filemtime


    public
            static        createVersionNumberedFilename(string $file) : string

This will make the filename automatically change when a file is changed, and by that re-cached by the browser. If the file does not exist physically the original file passed to the function is returned without the timestamp.

Behaviour is influenced by the setting TYPO3_CONF_VARS['BE' and 'FE'][versionNumberInFilename] = TRUE : modify filename = FALSE : add timestamp as query parameter

Parameters

$file : string: Relative path to file including all potential query parameters (not htmlspecialchared yet)

Return values

string —

Relative path with version filename including the timestamp

dirname()

Returns the directory part of a path without trailing slash If there is no dir-part, then an empty string is returned.


    public
            static        dirname(string $path) : string

Behaviour:

'/dir1/dir2/script.php' => '/dir1/dir2' '/dir1/' => '/dir1' 'dir1/script.php' => 'dir1' 'd/script.php' => 'd' '/script.php' => '' '' => ''

Parameters

$path : string: Directory name / path

Return values

string —

Processed input value. See function description.

expandList()

Expand a comma-separated list of integers with ranges (eg 1,3-5,7 becomes 1,3,4,5,7).


    public
            static        expandList(string $list) : string

Ranges are limited to 1000 values per range.

Parameters

$list : string: Comma-separated list of integers with ranges (string)

Return values

string —

New comma-separated list of items

explodeUrl2Array()

Explodes a string with GETvars (eg. "&id=1&type=2&ext[mykey]=3") into an array.


    public
            static        explodeUrl2Array(string $string) : array<string|int, string>

Note! If you want to use a multi-dimensional string, consider this plain simple PHP code instead:

$result = []; parse_str($queryParametersAsString, $result);

However, if you do magic with a flat structure (e.g. keeping "ext[mykey]" as flat key in a one-dimensional array) then this method is for you.

Parameters

$string : string: GETvars string

Return values

array<string|int, string> —

Array of values. All values AND keys are rawurldecoded() as they properly should be. But this means that any implosion of the array again must rawurlencode it!

fixed_lgd_cs()

Truncates a string with appended/prepended "..." and takes current character set into consideration.


    public
            static        fixed_lgd_cs(string $string, int $chars[, string $appendString = '...' ]) : string

Parameters

$string : string: String to truncate
$chars : int: Must be an integer with an absolute value of at least 4. if negative the string is cropped from the right end.
$appendString : string = '...': Appendix to the truncated string

Return values

string —

Cropped string

fixPermissions()

Sets the file system mode and group ownership of a file or a folder.


    public
            static        fixPermissions(string $path[, bool $recursive = false ]) : bool

Parameters

$path : string: Path of file or folder, must not be escaped. Path can be absolute or relative
$recursive : bool = false: If set, also fixes permissions of files and folders in the folder (if $path is a folder)

Return values

bool —

TRUE on success, FALSE on error, always TRUE on Windows OS

fixWindowsFilePath()

Fixes a path for windows-backslashes and reduces double-slashes to single slashes


    public
            static        fixWindowsFilePath(string $theFile) : string

Parameters

$theFile : string

Return values

string

flushInternalRuntimeCaches()

Flushes some internal runtime caches: - the class-name mapping used by `makeInstance()` - the cache for `getIndpEnv()`


    public
            static        flushInternalRuntimeCaches() : void

This function is intended to be used in unit tests to keep environment changes from spilling into the next test.

Internal

formatSize()

Formats the input integer $sizeInBytes as bytes/kilobytes/megabytes (-/K/M)


    public
            static        formatSize(int $sizeInBytes[, string $labels = '' ][, int $base = 0 ]) : string

Parameters

$sizeInBytes : int: Number of bytes to format.
$labels : string = '': Binary unit name "iec", decimal unit name "si" or labels for bytes, kilo, mega, giga, and so on separated by vertical bar (|) and possibly encapsulated in "". Eg: " | K| M| G". Defaults to "iec".
$base : int = 0: The unit base if not using a unit name. Defaults to 1024.

Return values

string —

Formatted representation of the byte number, for output.

get_dirs()

Returns an array with the names of folders in a specific path Will return 'error' (string) if there were an error with reading directory content.


    public
            static        get_dirs(string $path) : array<string|int, string>|string|null

Will return null if provided path is false.

Parameters

$path : string: Path to list directories from

Return values

array<string|int, string>|string|null —

Returns an array with the directory entries as values. If no path is provided, the return value will be null.

get_tag_attributes()

Returns an array with all attributes of the input HTML tag as key/value pairs. Attributes are only lowercase a-z $tag is either a whole tag (eg '<TAG OPTION ATTRIB=VALUE>') or the parameter list (ex ' OPTION ATTRIB=VALUE>') If an attribute is empty, then the value for the key is empty. You can check if it existed with isset()


    public
            static        get_tag_attributes(string $tag[, bool $decodeEntities = false ]) : array<string, string>

Parameters

$tag : string: HTML-tag string (or attributes only)
$decodeEntities : bool = false: Whether to decode HTML entities

Return values

array<string, string> —

Array with the attribute values.

getAllFilesAndFoldersInPath()

Recursively gather all files and folders of a path.


    public
            static        getAllFilesAndFoldersInPath(array<string|int, string> $fileArr, string $path[, string $extList = '' ][, bool $regDirs = false ][, int $recursivityLevels = 99 ][, string $excludePattern = '' ]) : array<string, string>

Parameters

$fileArr : array<string|int, string>: Empty input array (will have files added to it)
$path : string: The path to read recursively from (absolute) (include trailing slash!)
$extList : string = '': Comma list of file extensions: Only files with extensions in this list (if applicable) will be selected.
$regDirs : bool = false: If set, directories are also included in output.
$recursivityLevels : int = 99: The number of levels to dig down...
$excludePattern : string = '': regex pattern of files/directories to exclude

Return values

array<string, string> —

An array with the found files/directories.

getBytesFromSizeMeasurement()

Gets the bytes value from a measurement string like "100k".


    public
            static        getBytesFromSizeMeasurement(string $measurement) : int

Parameters

$measurement : string: The measurement (e.g. "100k")

Return values

int —

The bytes value (e.g. 102400)

getClassName()

Returns the class name for a new instance, taking into account registered implementations for this class


    public
            static        getClassName(class-string $className) : class-string

Parameters

$className : class-string: Base class name to evaluate

Internal

This is not a public API method, do not use in own extensions. Public to be accessible by extbase hydration.

Return values

class-string —

Final class name to instantiate with new [classname]

getContainer()


    public
            static        getContainer() : ContainerInterface

Internal

Return values

ContainerInterface

getFileAbsFileName()

Returns the absolute filename of a relative reference, resolves the "EXT:" prefix (way of referring to files inside extensions) and checks that the file is inside the TYPO3's base folder and implies a check with \TYPO3\CMS\Core\Utility\GeneralUtility::validPathStr().


    public
            static        getFileAbsFileName(string $fileName) : string

Parameters

$fileName : string: The input filename/filepath to evaluate

Return values

string —

Returns the absolute filename of $filename if valid, otherwise blank string.

getFilesInDir()

Finds all files in a given path and returns them as an array. Each array key is a md5 hash of the full path to the file. This is done because 'some' extensions like the import/export extension depend on this.


    public
            static        getFilesInDir(string $path[, string $extensionList = '' ][, bool $prependPath = false ][, string $order = '' ][, string $excludePattern = '' ]) : array<string, string>|string

Parameters

$path : string: The path to retrieve the files from.
$extensionList : string = '': A comma-separated list of file extensions. Only files of the specified types will be retrieved. When left blank, files of any type will be retrieved.
$prependPath : bool = false: If TRUE, the full path to the file is returned. If FALSE only the file name is returned.
$order : string = '': The sorting order. The default sorting order is alphabetical. Setting $order to 'mtime' will sort the files by modification time.
$excludePattern : string = '': A regular expression pattern of file names to exclude. For example: 'clear.gif' or '(clear.gif|.htaccess)'. The pattern will be wrapped with: '/^' and '$/'.

Return values

array<string, string>|string —

Array of the files found, or an error message in case the path could not be opened.

getIndpEnv()

Abstraction method which returns System Environment Variables regardless of server OS, CGI/MODULE version etc. Basically this is SERVER variables for most of them.


    public
            static        getIndpEnv(string $getEnvName) : string|bool|array<string, string|bool|null>|null

This should be used instead of getEnv() and $_SERVER/ENV_VARS to get reliable values for all situations.

Parameters

$getEnvName : string: Name of the "environment variable"/"server variable" you wish to use. Valid values are SCRIPT_NAME, SCRIPT_FILENAME, REQUEST_URI, PATH_INFO, REMOTE_ADDR, REMOTE_HOST, HTTP_REFERER, HTTP_HOST, HTTP_USER_AGENT, HTTP_ACCEPT_LANGUAGE, QUERY_STRING, TYPO3_DOCUMENT_ROOT, TYPO3_HOST_ONLY, TYPO3_HOST_ONLY, TYPO3_REQUEST_HOST, TYPO3_REQUEST_URL, TYPO3_REQUEST_SCRIPT, TYPO3_REQUEST_DIR, TYPO3_SITE_URL, _ARRAY

Return values

Value based on the input key, independent of server/OS environment.

getInstances()

Get all currently registered non singleton instances


    public
            static        getInstances() : array<class-string, array<string|int, object>>

Warning: This is NOT a public API method and must not be used in own extensions! This method is only used in UnitTestCase base test tearDown() to verify tests have no left-over instances that were previously added using addInstance().

Internal

Return values

array<class-string, array<string|int, object>>

getMaxUploadFileSize()

Returns the maximum upload size for a file that is allowed. Measured in KB.


    public
            static        getMaxUploadFileSize() : int

This might be handy to find out the real upload limit that is possible for this TYPO3 installation.

Return values

int —

Maximum size of uploads that are allowed in KiB (divider 1024)

getSingletonInstances()

Get all currently registered singletons


    public
            static        getSingletonInstances() : array<class-string, SingletonInterface>

Warning: This is NOT a public API method and must not be used in own extensions! This method is usually only used in tests in setUp() to fetch the list of currently registered singletons, if this list is manipulated with setSingletonInstance() in tests.

Internal

Return values

array<class-string, SingletonInterface>

getUrl()

Reads the file or url $url and returns the content If you are having trouble with proxies when reading URLs you can configure your way out of that with settings within $GLOBALS['TYPO3_CONF_VARS']['HTTP'].


    public
            static        getUrl(string $url) : string|false

Parameters

$url : string: File/URL to read

Return values

string|false —

The content from the resource given as input. FALSE if an error has occurred.

implodeArrayForUrl()

Implodes a multidim-array into GET-parameters (eg. &param[key][key2]=value2&param[key][key3]=value3)


    public
            static        implodeArrayForUrl(string $name, array<string|int, mixed> $theArray[, string $str = '' ][, bool $skipBlank = false ][, bool $rawurlencodeParamName = false ]) : string

Parameters

$name : string: Name prefix for entries. Set to blank if you wish none.
$theArray : array<string|int, mixed>: The (multidimensional) array to implode
$str : string = '': (keep blank)
$skipBlank : bool = false: If set, parameters which were blank strings would be removed.
$rawurlencodeParamName : bool = false: If set, the param name itself (for example "param[key][key2]") would be rawurlencoded as well.

Return values

string —

Imploded result, fx. &param[key][key2]=value2&param[key][key3]=value3

implodeAttributes()

Implodes attributes in the array $arr for an attribute list in eg. and HTML tag (with quotes)


    public
            static        implodeAttributes(array<string, string|int> $arr[, bool $xhtmlSafe = false ][, bool $keepBlankAttributes = false ]) : string

Parameters

$arr : array<string, string|int>: Array with attribute key/value pairs, eg. "bgcolor" => "red", "border" => 0
$xhtmlSafe : bool = false: If set the resulting attribute list will have a) all attributes in lowercase (and duplicates weeded out, first entry taking precedence) and b) all values htmlspecialchar()'ed. It is recommended to use this switch!
$keepBlankAttributes : bool = false: If TRUE, don't check if values are blank. Default is to omit attributes with blank values.

Return values

string —

Imploded attributes, eg. 'bgcolor="red" border="0"'

inList()

Check for item in list Check if an item exists in a comma-separated list of items.


    public
            static        inList(string $list, string $item) : bool

Parameters

$list : string: Comma-separated list of items (string)
$item : string: Item to check for

Return values

bool —

TRUE if $item is in $list

intExplode()

Explodes a $string delimited by $delimiter and casts each item in the array to (int).


    public
            static        intExplode(string $delimiter, string $string[, bool $removeEmptyValues = false ]) : array<int, int>

Corresponds to \TYPO3\CMS\Core\Utility\GeneralUtility::trimExplode(), but with conversion to integers for all values.

Parameters

$delimiter : string: Delimiter string to explode with
$string : string: The string to explode
$removeEmptyValues : bool = false: If set, all empty values (='') will NOT be set in output

Return values

array<int, int> —

Exploded values, all converted to integers

isAllowedAbsPath()

Returns TRUE if the path is absolute, without backpath '..' and within TYPO3s project or public folder OR within the lockRootPath


    public
            static        isAllowedAbsPath(string $path) : bool

Parameters

$path : string: File path to evaluate

Return values

bool

isOnCurrentHost()

Checks if a given URL matches the host that currently handles this HTTP request.


    public
            static        isOnCurrentHost(string $url) : bool

Scheme, hostname and (optional) port of the given URL are compared.

Parameters

$url : string: URL to compare with the TYPO3 request host

Return values

bool —

Whether the URL matches the TYPO3 request host

isValidUrl()

Checks if a given string is a Uniform Resource Locator (URL).


    public
            static        isValidUrl(string $url) : bool

On seriously malformed URLs, parse_url may return FALSE and emit an E_WARNING.

filter_var() requires a scheme to be present.

http://www.faqs.org/rfcs/rfc2396.html Scheme names consist of a sequence of characters beginning with a lower case letter and followed by any combination of lower case letters, digits, plus ("+"), period ("."), or hyphen ("-"). For resiliency, programs interpreting URI should treat upper case letters as equivalent to lower case in scheme names (e.g., allow "HTTP" as well as "http"). scheme = alpha *( alpha | digit | "+" | "-" | "." )

Convert the domain part to punicode if it does not look like a regular domain name. Only the domain part because RFC3986 specifies the the rest of the url may not contain special characters: https://tools.ietf.org/html/rfc3986#appendix-A

Parameters

$url : string: The URL to be validated

Return values

bool —

Whether the given URL is valid

jsonEncodeForHtmlAttribute()

Serializes data to JSON, to be used in HTML attribute, e.g.


    public
            static        jsonEncodeForHtmlAttribute(mixed $value[, bool $useHtmlEntities = true ]) : string

<div data-value="[[JSON]]">...</div> ([[JSON]] represents return value of this function)

Parameters

$value : mixed
$useHtmlEntities : bool = true

Return values

string

jsonEncodeForJavaScript()

Serializes data to JSON, to be used in JavaScript instructions, e.g.


    public
            static        jsonEncodeForJavaScript(mixed $value) : string

<script>const value = JSON.parse('[[JSON]]');</script> ([[JSON]] represents return value of this function)

Parameters

$value : mixed

Return values

string

locationHeaderUrl()

Prefixes a URL used with 'header-location' with 'http://...' depending on whether it has it already.


    public
            static        locationHeaderUrl(string $path) : mixed

If already having a scheme, nothing is prepended
If having REQUEST_URI slash '/', then prefixing 'http://[host]' (relative to host)
Otherwise prefixed with TYPO3_REQUEST_DIR (relative to current dir / TYPO3_REQUEST_DIR)

Parameters

$path : string: URL / path to prepend full URL addressing to.

makeInstance()

Creates an instance of a class taking into account the class-extensions API of TYPO3. USE THIS method instead of the PHP `new` keyword.


    public
            static        makeInstance(T> $className, mixed ...$constructorArguments) : T

For example, $obj = new myclass; should be $obj = \TYPO3\CMS\Core\Utility\GeneralUtility::makeInstance("myclass") instead.

You can also pass arguments for a constructor: GeneralUtility::makeInstance(\myClass::class, $arg1, $arg2, ..., $argN)

Parameters

$className : T>: name of the class to instantiate, must not be empty and not start with a backslash
$constructorArguments : mixed

Return values

T —

the created instance

makeInstanceForDi()

Creates a class taking implementation settings and class aliases into account.


    public
            static        makeInstanceForDi(T> $className, mixed ...$constructorArguments) : T

Intended to be used to create objects by the dependency injection container.

Parameters

$className : T>: name of the class to instantiate
$constructorArguments : mixed: Arguments for the constructor

Internal

Return values

T —

the created instance

makeInstanceService()

Find the best service and check if it works.


    public
            static        makeInstanceService(string $serviceType[, string $serviceSubType = '' ][, array<string|int, mixed> $excludeServiceKeys = [] ]) : object|array<string|int, string>|false

Returns object of the service class.

This method is used for the legacy ExtensionManager:addService() mechanism, not with Dependency-Injected services. In practice, all remaining core uses of this mechanism are authentication services, which all have an info property.

Parameters

$serviceType : string: Type of service (service key).
$serviceSubType : string = '': Sub type like file extensions or similar. Defined by the service.
$excludeServiceKeys : array<string|int, mixed> = []: List of service keys which should be excluded in the search for a service

Return values

object|array<string|int, string>|false —

The service object or an array with error infos, or false if no service was found.

md5int()

Makes a positive integer hash out of the first 7 chars from the md5 hash of the input


    public
            static        md5int(string $str) : int

Parameters

$str : string: String to md5-hash

Return values

int —

Returns 28bit integer-hash

mkdir()

Wrapper function for mkdir.


    public
            static        mkdir(string $newFolder) : bool

Sets folder permissions according to $GLOBALS['TYPO3_CONF_VARS']['SYS']['folderCreateMask'] and group ownership according to $GLOBALS['TYPO3_CONF_VARS']['SYS']['createGroup']

Parameters

$newFolder : string: Absolute path to folder, see PHP mkdir() function. Removes trailing slash internally.

Return values

bool —

TRUE if operation was successful

mkdir_deep()

Creates a directory - including parent directories if necessary and sets permissions on newly created directories.


    public
            static        mkdir_deep(string $directory) : void

Parameters

$directory : string: Target directory to create

normalizeIPv6()

Normalize an IPv6 address to full length


    public
            static        normalizeIPv6(string $address) : string

Parameters

$address : string: Given IPv6 address

Return values

string —

Normalized address

purgeInstances()

Purge all instances returned by makeInstance.


    public
            static        purgeInstances() : void

This function is most useful when called from tearDown in a test case to drop any instances that have been created by the tests.

Warning: This is a helper method for unit tests. Do not call this directly in production code!

quoteJSvalue()

Quotes a string for usage as JS parameter.


    public
            static        quoteJSvalue(string $value) : string

Parameters

$value : string: the string to encode, may be empty

Return values

string —

the encoded value already quoted (with single quotes),

removeDotsFromTS()

Removes dots "." from end of a key identifier of TypoScript styled array.


    public
            static        removeDotsFromTS(array<string|int, mixed> $ts) : array<string|int, mixed>

array('key.' => array('property.' => 'value')) --> array('key' => array('property' => 'value'))

Parameters

$ts : array<string|int, mixed>: TypoScript configuration array

Return values

array<string|int, mixed> —

TypoScript configuration array without dots at the end of all keys

removePrefixPathFromList()

Removes the absolute part of all files/folders in fileArr


    public
            static        removePrefixPathFromList(array<string|int, string> $fileArr, string $prefixToRemove) : array<string|int, string>|string

Parameters

$fileArr : array<string|int, string>: The file array to remove the prefix from
$prefixToRemove : string: The prefix path to remove (if found as first part of string!)

Return values

array<string|int, string>|string —

The input $fileArr processed, or a string with an error message, when an error occurred.

removeSingletonInstance()

Removes the instance of a singleton class to be returned by `makeInstance`.


    public
            static        removeSingletonInstance(class-string $className, SingletonInterface $instance) : void

Warning: This is NOT a public API method and must not be used in own extensions! This method exists mostly for unit tests to inject a mock of a singleton class. If you use this, make sure to always combine this with getSingletonInstances() and resetSingletonInstances() in setUp() and tearDown() of the test class.

Parameters

$className : class-string
$instance : SingletonInterface

Internal

resetSingletonInstances()

Set a group of singleton instances. Similar to `setSingletonInstance()`, but multiple instances can be set.


    public
            static        resetSingletonInstances(array<class-string, SingletonInterface> $newSingletonInstances) : void

Warning: This is NOT a public API method and must not be used in own extensions! This method is usually only used in tests to restore the list of singletons in tearDown() that was backed up with getSingletonInstances() in setUp() and manipulated in tests with setSingletonInstance().

Parameters

$newSingletonInstances : array<class-string, SingletonInterface>

Internal

resolveBackPath()

Resolves "../" sections in the input path string.


    public
            static        resolveBackPath(string $pathStr) : string

For example "fileadmin/directory/../other_directory/" will be resolved to "fileadmin/other_directory/"

Parameters

$pathStr : string: File path in which "/../" is resolved

Return values

string

revExplode()

Reverse explode which explodes the string counting from behind.


    public
            static        revExplode(string $delimiter, string $string[, int $limit = 0 ]) : array<int, string>

Note: The delimiter has to given in the reverse order as it is occurring within the string.

GeneralUtility::revExplode('[]', '[my][words][here]', 2) ==> array('[my][words', 'here]')

Parameters

$delimiter : string: Delimiter string to explode with
$string : string: The string to explode
$limit : int = 0: Number of array entries

Return values

array<int, string> —

Exploded values

rmdir()

Wrapper function for rmdir, allowing recursive deletion of folders and files


    public
            static        rmdir(string $path[, bool $removeNonEmpty = false ]) : bool

Parameters

$path : string: Absolute path to folder, see PHP rmdir() function. Removes trailing slash internally.
$removeNonEmpty : bool = false: Allow deletion of non-empty directories

Return values

bool —

TRUE if operation was successful

sanitizeCssVariableValue()

Very, very, very basic CSS sanitizer which removes `{`, `}`, `\n`, `\r` from CSS variable values and encodes potential HTML entities `<`+`>`.


    public
            static        sanitizeCssVariableValue(string $value) : string

Parameters

$value : string

Return values

string

sanitizeLocalUrl()

Checks if a given string is a valid frame URL to be loaded in the backend.


    public
            static        sanitizeLocalUrl(string $url) : string

If the given url is empty or considered to be harmless, it is returned as is, else the event is logged and an empty string is returned.

Parameters

$url : string: potential URL to check

Return values

string —

$url or empty string

setContainer()


    public
            static        setContainer(ContainerInterface $container) : void

Parameters

$container : ContainerInterface

Internal

setIndpEnv()

This method is only for testing and should never be used outside tests.


    public
            static        setIndpEnv(non-empty-string $envName, string|bool|array<string, string|bool|null>|null $value) : mixed

Parameters

$envName : non-empty-string
$value : string|bool|array<string, string|bool|null>|null

Internal

setSingletonInstance()

Sets the instance of a singleton class to be returned by `makeInstance`.


    public
            static        setSingletonInstance(class-string $className, SingletonInterface $instance) : void

If this function is called multiple times for the same $className, makeInstance will return the last set instance.

Parameters

$className : class-string
$instance : SingletonInterface

Internal

split_fileref()

Splits a reference to a file in 5 parts


    public
            static        split_fileref(string $fileNameWithPath) : array<string, string>

Parameters

$fileNameWithPath : string: File name with path to be analyzed (must exist if open_basedir is set)

Return values

array<string, string> —

Contains keys [path], [file], [filebody], [fileext], [realFileext]

split_tag_attributes()

Returns an array with the 'components' from an attribute list from an HTML tag. The result is normally analyzed by get_tag_attributes Removes tag-name if found


    public
            static        split_tag_attributes(string $tag) : array<string|int, string>

Parameters

$tag : string: HTML-tag string (or attributes only)

Return values

array<string|int, string> —

Array with the attribute values.

splitCalc()

This splits a string by the chars in $operators (typical /+-*) and returns an array with them in


    public
            static        splitCalc(string $string, string $operators) : array<int, array<int, string>>

Parameters

$string : string: Input string, eg "123 + 456 / 789 - 4
$operators : string: Operators to split by, typically "/+-*

Return values

array<int, array<int, string>> —

Array with operators and operands separated.

tempnam()

Create temporary filename (Create file with unique file name) This function should be used for getting temporary file names - will make your applications safe for open_basedir = on REMEMBER to delete the temporary files after use! This is done by \TYPO3\CMS\Core\Utility\GeneralUtility::unlink_tempfile()


    public
            static        tempnam(string $filePrefix[, string $fileSuffix = '' ]) : non-empty-string

Parameters

$filePrefix : string: Prefix for temporary file
$fileSuffix : string = '': Suffix for temporary file, for example a special file extension

Return values

non-empty-string —

result from PHP function tempnam() with the temp/var folder prefixed.

trimExplode()

Explodes a string and removes whitespace-only values.


    public
            static        trimExplode(string $delim, string $string[, bool $removeEmptyValues = false ][, int $limit = 0 ]) : array<int, string>

If $removeEmptyValues is set, then all values that contain only whitespace are removed.

Each item will have leading and trailing whitespace removed. However, if the tail items are returned as a single array item, their internal whitespace will not be modified.

Parameters

$delim : string: Delimiter string to explode with
$string : string: The string to explode
$removeEmptyValues : bool = false: If set, all empty values will be removed in output
$limit : int = 0: If limit is set and positive, the returned array will contain a maximum of limit elements with the last element containing the rest of string. If the limit parameter is negative, all components except the last -limit are returned.

Return values

array<int, string> —

Exploded values

underscoredToLowerCamelCase()

Returns a given string with underscores as lowerCamelCase.


    public
            static        underscoredToLowerCamelCase(string $string) : string

Example: Converts minimal_value to minimalValue

Parameters

$string : string: String to be converted to camel case

Return values

string —

lowerCamelCasedWord

underscoredToUpperCamelCase()

Returns a given string with underscores as UpperCamelCase.


    public
            static        underscoredToUpperCamelCase(string $string) : string

Example: Converts blog_example to BlogExample

Parameters

$string : string: String to be converted to camel case

Return values

string —

UpperCamelCasedWord

unlink_tempfile()

Deletes (unlink) a temporary filename in the var/ or typo3temp folder given as input.


    public
            static        unlink_tempfile(string $uploadedTempFileName) : bool|null

The function will check that the file exists, is within TYPO3's var/ or typo3temp/ folder and does not contain back-spaces ("../") so it should be pretty safe. Use this after upload_to_tempfile() or tempnam() from this class!

Parameters

$uploadedTempFileName : string: absolute file path - must reside within var/ or typo3temp/ folder.

Return values

bool|null —

Returns TRUE if the file was unlink()'ed

upload_copy_move()

Moves $source file to $destination if uploaded, otherwise try to make a copy


    public
            static        upload_copy_move(string $source, string $destination) : bool

Parameters

$source : string: Source file, absolute path
$destination : string: Destination file, absolute path

Return values

bool —

Returns TRUE if the file was moved.

upload_to_tempfile()

Will move an uploaded file (normally in "/tmp/xxxxx") to a temporary filename in Environment::getProjectPath() . "var/" from where TYPO3 can use it.


    public
            static        upload_to_tempfile(string $uploadedFileName) : string

Use this function to move uploaded files to where you can work on them. REMEMBER to use \TYPO3\CMS\Core\Utility\GeneralUtility::unlink_tempfile() afterwards - otherwise temp-files will build up! They are NOT automatically deleted in the temporary folder!

Parameters

$uploadedFileName : string: The temporary uploaded filename, eg. $_FILES['[upload field name here]']['tmp_name']

Return values

string —

If a new file was successfully created, return its filename, otherwise blank string.

validEmail()

Checking syntax of input email address


    public
            static        validEmail(string $email) : bool

Parameters

$email : string: Input string to evaluate

Return values

bool —

Returns TRUE if the $email address (input string) is valid

validIP()

Validate a given IP address.


    public
            static        validIP(string $ip) : bool

Possible format are IPv4 and IPv6.

Parameters

$ip : string: IP address to be tested

Return values

bool —

TRUE if $ip is either of IPv4 or IPv6 format.

validIPv4()

Validate a given IP address to the IPv4 address format.


    public
            static        validIPv4(string $ip) : bool

Example for possible format: 10.0.45.99

Parameters

$ip : string: IP address to be tested

Return values

bool —

TRUE if $ip is of IPv4 format.

validIPv6()

Validate a given IP address to the IPv6 address format.


    public
            static        validIPv6(string $ip) : bool

Example for possible format: 43FB::BB3F:A0A0:0 | ::1

Parameters

$ip : string: IP address to be tested

Return values

bool —

TRUE if $ip is of IPv6 format.

validPathStr()

Checks for malicious file paths.


    public
            static        validPathStr(string $theFile) : bool

Returns TRUE if no '//', '..', '' or control characters are found in the $theFile. This should make sure that the path is not pointing 'backwards' and further doesn't contain double/back slashes. So it's compatible with the UNIX style path strings valid for TYPO3 internally.

Parameters

$theFile : string: File path to evaluate

Return values

bool —

TRUE, $theFile is allowed path string, FALSE otherwise

wrapJS()

Wraps JavaScript code XHTML ready with <script>-tags Automatic re-indenting of the JS code is done by using the first line as indent reference.


    public
            static        wrapJS(string $string[, array<string, string> $attributes = [] ]) : string

This is nice for indenting JS code with PHP code on the same level.

Parameters

$string : string: JavaScript code
$attributes : array<string, string> = []: (optional) script tag HTML attributes

Return values

string —

The wrapped JS code, ready to put into a XHTML page

writeFile()

Writes $content to the file $file


    public
            static        writeFile(string $file, string $content[, bool $changePermissions = false ]) : bool

Parameters

$file : string: Filepath to write to
$content : string: Content to write
$changePermissions : bool = false: If TRUE, permissions are forced to be set

Return values

bool —

TRUE if the file was successfully opened and written to.

writeFileToTypo3tempDir()

Writes $content to a filename in the typo3temp/ folder (and possibly one or two subfolders...) Accepts an additional subdirectory in the file path!


    public
            static        writeFileToTypo3tempDir(string $filepath, string $content) : string|null

Parameters

$filepath : string: Absolute file path to write within the typo3temp/ or Environment::getVarPath() folder - the file path must be prefixed with this path
$content : string: Content string to write

Return values

string|null —

Returns NULL on success, otherwise an error string telling about the problem.

writeJavaScriptContentToTemporaryFile()

Writes string to a temporary file named after the md5-hash of the string Quite useful for extensions adding their custom built JavaScript during runtime.


    public
            static        writeJavaScriptContentToTemporaryFile(string $content) : string

Parameters

$content : string: JavaScript to write to file.

Return values

string —

filename to include in the <script> tag

writeStyleSheetContentToTemporaryFile()

Writes string to a temporary file named after the md5-hash of the string Quite useful for extensions adding their custom built StyleSheet during runtime.


    public
            static        writeStyleSheetContentToTemporaryFile(string $content) : string

Parameters

$content : string: CSS styles to write to file.

Return values

string —

filename to include in the tag

xml2array()

Converts an XML string to a PHP array.


    public
            static        xml2array(string $string[, string $NSprefix = '' ][, bool $reportDocTag = false ]) : array<string|int, mixed>|string

This is the reverse function of array2xml() This is a wrapper for xml2arrayProcess that adds a two-level cache

Parameters

$string : string: XML content to convert into an array
$NSprefix : string = '': The tag-prefix resolve, eg. a namespace like "T3:"
$reportDocTag : bool = false: If set, the document tag will be set in the key "_DOCUMENT_TAG" of the output array

Return values

array<string|int, mixed>|string —

If the parsing had errors, a string with the error message is returned. Otherwise an array with the content.

xml2arrayProcess()

Converts an XML string to a PHP array.


    public
            static        xml2arrayProcess(string $string[, string $NSprefix = '' ][, bool $reportDocTag = false ]) : array<string|int, mixed>|string

This is the reverse function of array2xml()

Parameters

$string : string: XML content to convert into an array
$NSprefix : string = '': The tag-prefix resolve, eg. a namespace like "T3:"
$reportDocTag : bool = false: If set, the document tag will be set in the key "_DOCUMENT_TAG" of the output array

Return values

array<string|int, mixed>|string —

If the parsing had errors, a string with the error message is returned. Otherwise an array with the content.

xml2tree()

Parses XML input into a PHP array with associative keys


    public
            static        xml2tree(string $string[, int $depth = 999 ][, array<string|int, mixed> $parserOptions = [] ]) : array<string|int, mixed>|string

Parameters

$string : string: XML data input
$depth : int = 999: Number of element levels to resolve the XML into an array. Any further structure will be set as XML.
$parserOptions : array<string|int, mixed> = []: Options that will be passed to PHP's xml_parser_set_option()

Return values

array<string|int, mixed>|string —

The array with the parsed structure unless the XML parser returns with an error in which case the error message string is returned.

xmlRecompileFromStructValArray()

This implodes an array of XML parts (made with xml_parse_into_struct()) into XML again.


    public
            static        xmlRecompileFromStructValArray(array<int, array<string, mixed>> $vals) : string

Parameters

$vals : array<int, array<string, mixed>>: An array of XML parts, see xml2tree

Return values

string —

Re-compiled XML data.

checkInstanceClassName()

Checks that `$className` is non-empty and that `$instance` is an instance of `$className`.


    protected
            static        checkInstanceClassName(string $className, object $instance) : void

Parameters

$className : string
$instance : object

classHasImplementation()

Checks if a class has a configured implementation


    protected
            static        classHasImplementation(class-string $className) : bool

Parameters

$className : class-string

Return values

bool

createDirectoryPath()

Creates directories for the specified paths if they do not exist. This functions sets proper permission mask but does not set proper user and group.


    protected
            static        createDirectoryPath(string $fullDirectoryPath) : string

Parameters

$fullDirectoryPath : string

Return values

string —

Path to the first created directory in the hierarchy

encodeFileSystemPathComponentForUrlPath()


    protected
            static        encodeFileSystemPathComponentForUrlPath(string $path) : string

Parameters

$path : string

Return values

string

getImplementationForClass()

Returns the configured implementation of the class


    protected
            static        getImplementationForClass(class-string $className) : class-string

Parameters

$className : class-string

Return values

class-string

getLogger()


    protected
            static        getLogger() : LoggerInterface

Return values

LoggerInterface

webserverUsesHttps()

Determine if the webserver uses HTTPS.


    protected
            static        webserverUsesHttps() : bool

HEADS UP: This does not check if the client performed a HTTPS request, as possible proxies are not taken into account. It provides raw information about the current webservers configuration only.

Return values

bool

GeneralUtility

Table of Contents

Properties

Methods

Properties

$container

$finalClassNameCache

$indpEnvCache

$nonSingletonInstances

$singletonInstances

Methods

addInstance()

Parameters

Tags

array2xml()

Parameters

Tags

Return values

callUserFunction()

Parameters

Tags

Return values

camelCaseToLowerCaseUnderscored()

Parameters

Return values

cmpFQDN()

Parameters

Return values

cmpIP()

Parameters

Return values

cmpIPv4()

Parameters

Return values

cmpIPv6()

Parameters

Return values

copyDirectory()

Parameters

createVersionNumberedFilename()

Parameters

Return values

dirname()

Parameters

Return values

expandList()

Parameters

Return values

explodeUrl2Array()

Parameters

Tags

Return values

fixed_lgd_cs()

Parameters

Return values

fixPermissions()

Parameters

Return values

fixWindowsFilePath()

Parameters

Return values

flushInternalRuntimeCaches()

formatSize()

Parameters

Return values

get_dirs()

Parameters

Return values

get_tag_attributes()

Parameters

Return values

getAllFilesAndFoldersInPath()

Parameters

Return values

getBytesFromSizeMeasurement()

Parameters

Return values

getClassName()

Parameters

Return values